Mulush pull-out cabinet drawer 26"W x 21"D x 3"H — finished wood organizer with soft-close full-extension slides

This ready-made wooden drawer brings a durable, finished surface and quiet soft-close slides to under-sink areas, base cabinets, or side-mounted storage spots. Designed from knotless solid wood with a double natural clear coat and a plywood bottom, the unit ships fully assembled with pre-drilled metal holes and all hardware, so it installs quickly into compatible cabinets.

How much usable space does this drawer actually offer?

The wooden portion of the drawer measures 25" outer width, 21" depth, and 3" height, while the inner usable space is about 23.7" wide by 19.7" deep. With the slide rails added, the total external width becomes 26". The low-profile 3" height makes it ideal for shallow cabinet frames and under-sink storage where vertical clearance is limited.

• Outer wooden width: 25"; overall width with rails: 26"
• Inner compartment: approximately 23.7" W × 19.7" D
• Drawer height: 3" (0.375" clearance under drawer bottom)
• Plywood bottom thickness: 1/4"

Will this fit my cabinet — what measurements should I take?

Measure the narrowest cabinet width with doors opened as far as they go, and use the smaller of left/right depth measurements. If installing on the cabinet bottom, ensure a minimum cabinet width over 26.5", depth over 21.5", and height over 3.5". Side-mount installs need a 26" width and 21–23" depth.

• Bottom mount: cabinet width > 26.5", depth > 21.5", height > 3.5"
• Side mount: cabinet width = 26", depth 21"–23", height > 3.5"
• Consider hinge thickness and interior obstructions (pipes, braces)
• Measure every intended slide location for accurate fit

How does the soft-close slide perform and what is the load capacity?

The included full-extension soft-close slide offers quiet operation and smooth access to the entire drawer length. Each slide assembly is rated to support up to 60 lbs, making the drawer suitable for dishes, pantry goods, small appliances, or cleaning supplies. The soft-close mechanism prevents slamming and helps protect cabinet interiors and stored items.

• Full-extension slides for complete access to contents
• Soft-close feature reduces noise and wear
• Rated support: up to 60 lbs
• Metal pre-drilled holes simplify alignment and installation

What materials and finish should I expect and how long will it last?

The drawer body is made from 5/8" knotless solid wood with a double-layer natural clear coating that highlights the grain while providing surface protection. The bottom panel is 1/4" plywood for stable support. With proper installation and typical kitchen use, the solid wood construction and protective finish offer long-lasting durability and an attractive, finished look.

• 5/8" knotless solid wood construction
• Double-layer natural clear coat for protection and appearance
• 1/4" plywood bottom for added strength
• Comes fully assembled with screws and manual

Who is this for: The Mulush 26" x 21" x 3" pull-out drawer fits homeowners, renters, and contractors seeking a ready-to-install, low-profile wooden organizer for kitchen base cabinets, under-sink areas, or shallow storage bays. It suits anyone who wants quiet soft-close operation, solid wood aesthetics, and up to 60-pound load capacity without custom carpentry. Check interior cabinet measurements and hinge clearances before purchase to ensure a clean fit and easy installation.