Refinished Bath Solutions Ekopel 2K Pour-On Bathtub Refinishing Kit — White, Odorless 2-component Enamel with Roller & Pour Tools

Ekopel 2K Pour-On Bathtub Refinishing Kit is a complete, odorless pour-on enamel system for restoring worn tubs, sinks, and tiles to a glossy white finish without professional tools. Refinished Bath Solutions supplies this all-in-one 2K pour-on kit so homeowners can refinish tubs themselves with minimal fuss. The product combines a thick, oil-free enamel with application tools and online video instructions to make a durable resurfacing job achievable in a single DIY session. It’s formulated to adhere to common bath surfaces like porcelain, ceramic, fiberglass, and enamel and is made in the USA.

How does the Ekopel kit revive a stained or chipped bathtub?

The kit works by creating a new, continuous enamel layer poured over the prepared tub surface. After surface prep, the two-component system is mixed and poured to flow and level into chips and discolorations, producing a seamless glossy coat.

• 2K mixed enamel fills shallow imperfections and covers discoloration
• Thick pour-on viscosity levels out for uniform gloss
• Forms a hard surface once fully set to resist everyday wear

What surfaces and tools are included, and will it stick?

Ekopel bonds to typical bathroom substrates including porcelain, ceramic, fiberglass, and enamel without special primers when prepped correctly. The kit comes with a foam roller and replacement covers, scooper boxes for controlled pouring, and step-by-step video guides so you don’t need extra spray gear or professional experience.

• Included foam roller and covers for smooth feathering and edges
• Scooper boxes help distribute the pour evenly across the tub floor
• Adheres to common bath surfaces after proper cleaning and sanding

How long does the finish take to set and when can I use the tub?

The product sets to a hard, resilient surface in about 24 hours under recommended room conditions, though full curing and maximum durability develop over additional time. Maintain around 72°F for the listed set time; cooler temperatures will slow curing and warm, humid conditions can affect leveling.

• Initial set in roughly 24 hours under recommended temperature
• Avoid using the tub while the coating is curing to prevent marks
• Allow extra time in colder environments before light use

Do I need prior refinishing experience or extra tools?

No prior professional experience is required; the kit is designed for DIYers. Video tutorials guide you through cleaning, sanding, mixing, pouring, and finishing so most homeowners can complete a quality resealing project with the included materials.

• Step-by-step online videos cover the full process from prep to finish
• All essential consumables and application tools provided in the kit
• No spray equipment or specialized shop tools needed for application

This product is ideal for homeowners, landlords, and rental managers who want a cost-effective, cosmetically transformative option for worn or discolored tubs and sinks without hiring a professional. Choose Ekopel if you prefer a pour-on, low-odor enamel system with included tools and clear guidance—suitable for porcelain, ceramic, fiberglass, and enamel fixtures when proper prep is followed. If you have deep structural damage, non-standard substrates, or require a commercial-grade resurfacing warranty, consult a professional refinish service before starting.

FAQ

Q: Will Ekopel bond to a fiberglass tub?

A: Yes—when the surface is properly cleaned and lightly sanded, Ekopel adheres to fiberglass, porcelain, ceramic, and enamel surfaces.

Q: How long before I can use the tub after refinishing?

A: The coating sets in about 24 hours at 72°F, but avoid regular use until fully cured; cooler temperatures may lengthen cure time.