Slipstick Stack-Its furniture risers 1" clear set of 8 — stackable adjustable 1–3" lifts, non-slip heavy-duty support

These clear, low-profile risers are made to raise beds, sofas, chairs, tables, and other furniture with legs, panels, or casters that fit the specified size range. Each riser measures 4 inches in diameter and 1 inch tall, nests securely with others for incremental height, and includes removable non-slip grippers to protect floors and reduce sliding. Built for heavy loads, individual Stack-Its support up to 1,000 pounds so a typical four-leg piece can get up to 4,000 pounds of support from one set of four risers.

What furniture will Slipstick Stack-Its CB658 fit?

These risers are engineered to accept a wide variety of feet and bases, but you should measure before buying. They work best with round legs 1"–3.5" in diameter, square legs 1"–3.25" wide, thin panels 0.5"–1.5" thick, and caster wheels up to 2" diameter by 2.75" width.

• Round legs: 1"–3.5" diameter fit into recessed holder tops
• Square legs: 1"–3.25" width compatible with fit contours
• Panels/bases: 0.5"–1.5" thickness seated securely
• Casters: up to 2" diameter and 2.75" width

How do I stack and secure multiple risers safely?

Stack-Its interlock so you can add one-inch increments easily: one riser for 1", two for 2", and three for 3" (three-stack requires purchasing extra risers). For a stable connection, move the rubber o-ring from the bottom of the lower riser to the top of it before nesting the next riser; do not stack more than three under any single leg.

• Remove the bottom rubber o-ring and place it on top when stacking
• Maximum recommended stack: 3 risers (3" lift)
• Do not exceed 3 risers per support for safety
• Use included adhesive non-slip pads between furniture and riser

Will these risers damage my floors or slip under heavy furniture?

Each riser includes a removable rubber gripper that protects hard floors and provides traction to minimize sliding; it also works on low-pile carpet but is not recommended for high-pile carpet. The clear plastic design reduces visual impact while the non-slip pads help prevent shifting during everyday use.

• Removable rubber o-ring protects floors and increases grip
• Suitable for hardwood, tile, laminate, vinyl, and low-pile carpet
• Not recommended for high-pile carpet surfaces
• Transparent finish keeps furniture lines unobtrusive

How much weight can each riser and set hold?

Slipstick engineered each Stack-It to carry heavy loads; a single riser is rated to support 1,000 pounds. In typical installations four risers under a four-legged piece will collectively support up to 4,000 pounds, making them suitable for solid sofas, dressers, and beds.

• Single riser capacity: 1,000 pounds
• Set of four under a piece: up to 4,000 pounds total
• Clear design keeps support discreet and sturdy
• Not for use with legs/bases outside the stated fit ranges

Who is this for: Slipstick CB658 Stack-Its are ideal for anyone needing small, discreet lifts to raise furniture for comfort, easier cleaning, or visible storage space—especially owners of low-profile couches, beds, tables, dressers, and desks with compatible legs or casters. Measure leg or caster dimensions before purchase and avoid high-pile carpet installations. If you need taller, single-piece lifts, consider Slipstick models that provide higher fixed rises.