UrbanRed Adhesive Curtain Track — 5 m (16.4 ft) self-adhesive ceiling track for lightweight curtains

UrbanRed Adhesive Curtain Track is a 5 m (16.4 ft) self-adhesive ceiling-mounted curtain rail kit that installs without drilling to create a smooth, continuous track for lightweight curtains.

This all-in-one kit supplies multiple 0.6 ft track segments, rollers, hooks, connectors and end caps so you can build a tailored curtain run up to 16.4 ft long. Constructed from lightweight PVC and designed for flat, clean surfaces, the system is intended for quick, damage-free installation where drilling or anchors are not desired. Follow the included guidance for surface prep and temperature recommendations to get the strongest hold.

How does the adhesive track hold up without screws?

The track uses a high-bond adhesive tape applied to the back of each PVC segment. When mounted to a completely smooth, dry surface at the recommended temperature range, the tape creates a secure bond that supports lightweight curtains.

• High-adhesion backing pre-applied to each segment
• Install temperature advised between 50°F (10°C) and 95°F (35°C)
• Best on smooth plaster, painted drywall, or flat ceilings
• Not recommended for textured ceilings, wallpaper, or damp areas

What comes in the package and how do I customize the length?

The kit contains everything needed to create a continuous curtain rail: fifteen 0.6 ft track pieces, forty rollers, forty hooks, ten end covers and fourteen connectors. Pieces snap together to form a single run up to 16.4 ft, and you can cut segments to size for precise fitting.

• 15 x 0.6 ft PVC track segments for modular length
• 40 track rollers and 40 iron curtain hooks included
• 14 connectors and 10 end caps for a finished look
• Trim with a fine-tooth hacksaw to shorten segments

How easy is installation and what surface prep is required?

Installation is designed to be straightforward but requires correct surface preparation. Clean the mounting area of dust, grease and loose paint; warm the adhesive with a hair dryer for stronger adhesion; then peel and press the track into place, holding firmly while the bond sets.

• Clean surfaces thoroughly before applying
• Heat the adhesive backing briefly for better stick
• Press and hold each segment for secure contact
• Avoid bathrooms, high-humidity rooms and textured walls

What load can the UrbanRed track support and where should it be used?

Designed for lightweight drapery, the combined system supports up to 12 lbs when adhered to a completely smooth, flat surface. Use it for sheer curtains, lightweight room dividers, and areas where you want a clean ceiling-mounted look without permanent fixtures.

• Maximum recommended curtain weight: 12 lbs (5.4 kg)
• Ideal for sheers, light linens, and room dividers
• Not for heavy or layered blackout curtains
• For longer spans, ensure continuous smooth surfaces for best support

Who is this for: The UrbanRed Adhesive Curtain Track is suited to renters, seasonal decorators, and homeowners who want a fast, low-impact curtain solution without drilling. It’s also useful for DIYers needing a customizable, modular rail for lightweight fabrics, or anyone seeking a discreet, ceiling-mounted track where traditional hardware would be impractical. If your walls or ceiling are smooth and clean and you need a tidy, continuous curtain appearance up to 16.4 ft, this kit provides the components and convenience to install a functional rail quickly. For textured, damp, or uneven surfaces, consider a mechanical-mounted alternative to ensure long-term performance.